Inconel 625 Capillary Tube Chemical Injection Line

Kufotokozera Kwachidule:

Kuthekera kopanga kwapadera ndi njira zomwe zimalola Meilong Tube kupanga machubu aatali kwambiri opitilira jekeseni amankhwala omwe amapezeka muzitsulo zosapanga dzimbiri ndi ma nickel alloys apamwamba.Machubu athu aatali amakhola amagwiritsidwa ntchito kwambiri pobaya jekeseni wamankhwala m'zitsime zapansi pa nyanja ndi kumtunda.Kutalika popanda orbital welds zomwe zimachepetsa kuthekera kwa zolakwika ndi zolephera.Kuphatikiza apo, ma coil athu amakhala ndi ukhondo kwambiri komanso wosalala mkati mwake omwe ndi abwino kwambiri popanga jakisoni wamankhwala.Ma coil amapereka nthawi yayifupi yoyankha ma hydraulic, mphamvu yakugwa kwakukulu, ndikuchotsa kutulutsa kwa methanol.

Titumizireni imelo

Tsatanetsatane wa Zamalonda

Zolemba Zamalonda

Kukula kwa Tubing

Kunja kwa mizere yowongolera ndi 3/8'' (9.53mm).

Makulidwe a khoma: 0.035'' (0.89mm), 0.049'' (1.24mm), 0.065'' (1.65mm), 0.083'' (2.11mm)

Machubu a jakisoni amapezeka motalika kuchokera pa 400 mapazi (122 metres) mpaka 32,808 mapazi (10,000 metres).Palibe ma welds a orbitally butt.

Mafotokozedwe ena (1/8'' mpaka 3/4'') amapezeka popempha.

Kukula kwa Imperial		Metric size
OD inchi	WT inchi	OD mm	WT mm
1/8 (0.125)	0.028	3.18	0.71
1/8 (0.125)	0.035	3.18	0.89
3/16 (0.188)	0.028	4.76	0.71
	0.035	4.76	0.89
	0.049	4.76	1.24
1/4 (0.250)	0.035	6.35	0.89
	0.049	6.35	1.24
	0.065	6.35	1.65
	0.083	6.35	2.11
3/8 (0.375)	0.035	9.53	0.89
	0.049	9.53	1.24
	0.065	9.53	1.65
	0.083	9.53	2.11
1/2 (0.500)	0.035	12.7	0.89
	0.049	12.7	1.24
	0.065	12.7	1.65
	0.083	12.7	2.11

Chiwonetsero cha Zamalonda

Inconel 625 Capillary Tube Chemical Injection Line (2)

Inconel 625 Capillary Tube Chemical Injection Line (3)

Technical Datasheet

Aloyi	OD	WT	Zokolola Mphamvu	Kulimba kwamakokedwe	Elongation	Kuuma	Kupanikizika kwa Ntchito	Kuthamanga Kwambiri	Kugwetsa Pressure
	inchi	inchi	Mpa	Mpa	%	HV	psi	psi	psi
			min.	min.	min.	max.	min.	min.	min.
Mtengo wa 625	0.375	0.035	414	827	30	266	8,426	26,930	11,200
Mtengo wa 625	0.375	0.049	414	827	30	266	12,096	38,657	14,966
Mtengo wa 625	0.375	0.065	414	827	30	266	16,583	53,000	18,922
Mtengo wa 625	0.375	0.083	414	827	30	266	21,560	68,896	22,916

Dimensional Tolerance

ASTM B704 / ASME SB704, Inconel 625, UNS N06625
ASTM B751 / ASME SB751
Kukula kwa OD	Kulekerera OD	Kulekerera WT
1/8''≤OD<5/8'' (3.18≤OD<15.88 mm)	±0.004'' (±0.10 mm)	± 12.5%
5/8≤OD≤1'' (15.88≤OD≤25.4 mm)	±0.0075'' (±0.19 mm)	± 12.5%

Meilong Standard
Kukula kwa OD	Kulekerera OD	Kulekerera WT
1/8''≤OD<5/8'' (3.18≤OD<15.88 mm)	±0.004'' (±0.10 mm)	±10%
5/8≤OD≤1'' (15.88≤OD≤25.4 mm)	±0.004'' (±0.10 mm)	± 8%

ASTM B444 / ASME SB444, Inconel 625, UNS N06625
Kukula kwa OD	Kulekerera OD	Kulekerera WT
1/8'' ≤OD<3/16'' (3.18≤OD<4.76 mm)	+0.003'' (+0.08 mm) / -0	±10%
3/16≤OD<1/2'' (4.76≤OD<12.7 mm)	+0.004'' (+0.10 mm) / -0	±10%
3/16≤OD<1/2'' (4.76≤OD<12.7 mm)	+0.005'' (+0.13 mm) / -0	±10%

Meilong Standard
Kukula kwa OD	Kulekerera OD	Kulekerera WT
1/8'' ≤OD<3/16'' (3.18≤OD<4.76 mm)	+0.003'' (+0.08 mm) / -0	±10%
3/16≤OD<1/2'' (4.76≤OD<12.7 mm)	+0.004'' (+0.10 mm) / -0	±10%
1/2''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.004'' (+0.10 mm) / -0	± 8%